Our antennas were developed exclusively for jetvision shop by experienced radio amateurs and reputable labs. We either manufacture them by ourselves or are working in close cooperation with their factory.
Our own quality assurance ensures a design without compromises and highest quality and performance. These products constitute the best-in-class solution for ADS-B antennas.
Two types of antennas are available, either with or without preamplifier.
Our "Active Diapason" Antenna is an optimum solution when long antenna cables (from ca. 20 m cable length) are required. Cable losses will be compensated adequately and reception quality will be maintained. This antenna is also recommended for low performance receivers.
If no amplification is required, in special when using short or medium distance (up to ca. 15 m cable length) low loss cables with our Radarcape and Mode-S Beast we recommend our "A3 ADS-B" Antenna.
The "SCO-1090-MCX" Antenna is suggested for a direct connection to our Diamond Crown ADS-B Dongle.
Please note that our cables end up in a SMA male connector and eventually require an adapter to fit into the input connector of the receiver (which is MCX for the Dongles and BNC for the miniADSB).
All our antennas are offered as bundles mit cables and/or ADS-B receivers, too.
Please read our notes on Installation of Jetvision antennas.
"A3 ADS-B" Antenna (1090 MHz)Product no.: 67020Standard 1090 MHz ADS-B antenna with high gain (+ 5 dBi) for all ADS-B Receivers. Stable mounting, weatherproof. Ready for shipment in: 1-3 days
Delivery weight: 0.413 kg
|
1090 MHz Antenna ADS-B GPS combined antennaProduct no.: 67960Combined ADS-B and GPS antenna. Powerful ADS-B antenna with built-in GPS antenna. +5dBi stable weatherproof. Ready for shipment in: 1-3 days
Delivery weight: 0.45 kg
|
New SCO-868 FLARM Antenna (868 MHz)Product no.: 67050Standard 868 MHz FLARM antenna with high gain (+ 5 dBi) for all FLARM, Helium und LoRaWan receivers and transmitters. Stable mounting, weatherproof. Ready for shipment in: 1-3 days
Delivery weight: 0.413 kg
|
"Active Diapason" Antenna (1090 MHz)Product no.: 68200ADS-B antenna (Active antenna) 1090 MHz with integrated low noise amplifier. Best for usage with long distance antenna cables! Ready for shipment in: 1-3 days
Delivery weight: 0.377 kg
|
"Active Diapason AA 868" Antenna 868 MHz FLARMProduct no.: 69200Antenna 868 MHz (active) with integrated low noise amplifier (LNA). Suitable for usage in FLARM Systems (Open Glider Net). Ready for shipment in: 1-3 days
Delivery weight: 0.2 kg
|
"A3 ADS-B" Antenna V4A off-shore (1090 MHz)Product no.: 67305ADS-B antenna 1090 MHz (V4A stainless special steel) suitable for off-shore use. Good mounting, stable and weatherproof. Ready for shipment in: 1-3 days
Delivery weight: 1.1 kg
|
Yagi 1090 MHz - 13 NProduct no.: 67330Yagi antenna 1090MHz, 13 elements, N-type female, Gain 14.5 dBi, V/R > 22 dB, Alpha E 34°, Alpha H 40°, L 1160 mm, B 70 mm, H 140 mm. Ready for shipment in: 1-3 days
Delivery weight: 1.5 kg
|
BUNDLE: "Active Diapason" Antenna (1090 MHz)+ 20 m Antenna CableProduct no.: 68140This bundle contains the "Active Diapason" ADS-B Antenna (1090 MHz) and the 20 m Antenna Cable incl. accessories. Ready for shipment in: 1-3 days
Delivery weight: 1.2 kg
|
BUNDLE: "Active Diapason AA 868" Antenna 868 MHz + 20m CableProduct no.: 69140This bundle contains the "Active Diapason AA 868" Antenna for 868 MHz and the 20 m Antenna Cable incl. accessories. Ready for shipment in: 1-3 days
Delivery weight: 1.2 kg
|
Small Indoor Antenna (1090 MHz) with SMA-male Plug for Mode-S Beast, Radarcape and Air!SquitterProduct no.: 67560Small ready assembled ADS-B Antenna 1090 MHz for indoor with SMA plug for Radarcape and Mode-S Beast. Ready for shipment in: 1-3 days
Delivery weight: 0.02 kg
|
Small Indoor Antenna (1090 MHz) for ADS-B DongleProduct no.: 67235Small Indoor Antenna for ADS-B USB dongle (spare part) - 1090 MHz - black with cable and MCX connector. Ready for shipment in: 1-3 days
Delivery weight: 0.02 kg
|
GPS-AntennaProduct no.: 66903High quality and powerfull GPS-Antenna with black antenna cable- spare part for the Radarcape Ready for shipment in: 1-3 days
Delivery weight: 0.1 kg
|
Surge Protector SMA (male) - SMA (female)Product no.: 71200Gas tube RF coaxial surge protector with SMA-male to SMA-female interface. Protects antenna and devices for over-voltage. Ready for shipment in: 1-3 days
Delivery weight: 0.09 kg
|
Surge Protector N-female - SMA-femaleProduct no.: 71210Gas tube RF coaxial surge protector with N-female to SMA-female interface for panel mount. Protects antenna and devices for over-voltage. Ready for shipment in: 1-3 days
Delivery weight: 0.09 kg
|
BIAS TEEProduct no.: 69400BIAS TEE - Power supply of the active antenna via the antenna cable. 5-15V / 250mA max. at 100 MHz to 2.5GHz mini-USB input. Ready for shipment in: ca. 1-3 days
Delivery weight: 50 g
|
1090 MHz 3 Pole Cavity FilterProduct no.: 710101090 MHz 3 Pole Cavity Filter, 2x SMA-female. A filter with high Q factor and very low attenuation (0.5 dB) Ready for shipment in: 1-3 days
Delivery weight: 800 g
|
868 MHz 3 Pole Cavity Filter FLARMProduct no.: 71020FLARM - 868 MHz 3 Pole Cavity Filter, 2x SMA-female. A filter with high quality, very low attenuation (-0.5 dB) und high effort adjustment. Out of Stock
Delivery weight: 370 g
|
Splitter ADS-B/GPS with common port SMA-male and 2 SMA-femaleProduct no.: 71300Splitter ADS-B/GPS. To use separate ADS-B and GPS antennas instead of the combined antenna or vice versa. Ready for shipment in: 1-3 days
Delivery weight: 50 g
|
Splitter ADS-B/GPS with 3x SMA-femaleProduct no.: 71302Splitter ADS-B/GPS. To use separate ADS-B and GPS antennas instead of the combined antenna or vice versa. Ready for shipment in: 1-3 days
Delivery weight: 50 g
|
A3 1090 Antenna + 10m Cable + SMA/MCX PigtailProduct no.: 67121Bundle ADS-B Antenna A3-1090 plus 10m cable for the direct connection to our Diamond Crown ADS-B Dongle Ready for shipment in: 1-3 days
Delivery weight: 1.5 kg
|
Double steel mast arm 110cmProduct no.: 67250Double steel mast arm, 2x 55cm, Ø38mm Ready for shipment in: 1-3 days
Delivery weight: 20 kg
|
Double steel mast arm 50cmProduct no.: 67251Double steel mast arm, 2x 35cm, Ø38mm Ready for shipment in: 1-3 days
Delivery weight: 15 kg
|
Single side steel mast arm 25cmProduct no.: 67252Single side steel mast arm, 25cm, Ø48mm Ready for shipment in: 1-3 days
Delivery weight: 10 kg
|
Self Sealing TapeProduct no.: 67901Self sealing tape for antenna connectors to prevent them for water diffusion. Ready for shipment in: 1-3 days
Delivery weight: 0.02 kg
|